Quick Quote

Quick Quote

  • Please select the sector that most closely matches your own from the list below.
  • Drop files here or

    Parker Denison P12H Premier Series Pump

    Parker Denison P12H Premier Series Pump

    Axial Piston Pumps

    • Description

    Description

    Denison P12H Premier Series pumps are variable displacement open loop piston pumps with emphasis on superior design and few maintenance requirements. Low inlet velocity requirements allow the pumps to run fast without the added expense of boosting the inlet. Modified pistons that reduce the amount of trapped fluid volume result in improved efficiency.

    The Premier Series pumps have been designed to operate in a wide range of industries where variable flow, high pressure and/or high speeds are required such as: presses, construction machinery, injection moulding, wood, aircraft, drilling, mining, steel and cranes.

    This pump is designed to operate in any position. For vertical mounting with shaft upward, it is recommended that a 5 psi (0,3 bar) check valve be installed in the case drain port and that the air bleed port be connected to the reservoir in order to circulate oil past the shaft bearing. The mounting hub and four bolt mounting flange are in full conformance with SAE/ISO standards.

    Summary technical data for the Denison P12H series pump (high speed version):
    • Maximum displacement – 12.2in3/rev or 200cm3/rev;
    • Continuous pressure – 6000psi /414 bar;
    • Intermittent pressure 7250psi / 500bar;
    • Speed at atmospheric inlet 2100rpm; 2700 maximum with boost;
    • Mounting flange 4 bolt SAE 165-4(E), ISO3019/2B4HW 224 – SAE keyed shaft ISO3019/2 – SAE splined shaft 44-4E 50mm ISO4156, 50mm DIN5480; 
    • P12H pump weight 136kg / 300lbs;
    • Maximum allowable continuous case pressure – 25psi / 1.7bar; 
    • Maximum allowable intermittent case pressure – 50psi / 3.4bar.

    Contact us for further technical details and configuration options.

    Quick Quote