We offer a range of Sunfab Dual Flow hydraulic pumps…
The range of Sunfab dual flow hydraulic pumps SCPD and SLPD comprises 10 different sizes from 20/20 cm3 up to 76/76 cm3. The SCPD dual flow pumps are of bent-axis design, the SLPD pumps are of inline design with swash plate.
Sunfab dual flow pump is ideal for vehicles which require two different flows.
For vehicles with several types of hydraulic equipment, a large pump with a single flow is often a poor compromise. Certain parts of the equipment run too fast, others too slowly or too much heat is generated. A Sunfab dual flow pump is both the optimum technical and most economical solution for this.
Sunfab dual flow pumps are available with two equal large flows or one small and one large flow. The latter can give three different total flows: the small, the large and the combined. Where there is a need for different pressure levels, the flow and the pressure can be combined for a maximum use of the permitted power take-off torque.
The range comprises: SCPD 56/26 DIN, SCPD56/26 DIN By-Pass, SCPD 70/36 DIN By-Pass, SCPD 76/76 DIN, SLPD 20/20-64/32 DIN and SLPD 20/20-64/32 DIN SAVTEC.