Slack & Parr FDL Flow Dividers


Slack and Parr FDL series rotary gear flow dividers are available with 2 to 6 elements/outlets and from 12 cc/rev to 30 cc/rev.

These flow dividers have: a SG grade cast iron body; heat treated steel gears and spindles; nitrile seals as standard and needle bearings. Optional extras include: inductive sensors, relief valves. A stainless steel version is also available.

Across the range:

  • minimum input flow varies from 18 to 135 litres/minute at 750 rpm;
  • standard input flow varies from 36 to 270 litres/minute at 1500 rpm;
  • maximum input flow varies from 72 to 540 litres/minute at 3000 rpm.

Maximum efficiency is achieved when a flow divider is selected to pass the required flows from 1000 to 2000 rpm.

Rotary flow dividers split the input flow from a single supply into 2 or more outputs of equal or unequal flows. They can be used to synchronise rams to ensure level lifting or to operate two or more hydraulic actuators at different speeds, each with integral relief valve. They can also be used for can also be used for pressure intensifications by dumping one or more outlets to tank.

Download the Slack and Parr FDL Series Technical Catalogue >>>

Contact us for further technical details and configuration options.

Quick Quote