Salami VD10A – VD12A Cast Iron Monoblock Valve

The Salami VD10A – VD12A series sectional direct control valves are constructed in cast-iron (inlet section, working section, outlet section). Moreover, they feature up to 8 working sections with interchangeable spools constructed in hardened and nickel-plated steel.

Salami VD10A – VD12A general functional features:

• load check valve protection on each section
• auxiliary valve either on port A or B or on both
• power beyond (HPCO) configuration
• several types of spool: double and single-acting, spool motor, float position, regenerative position etc.
• several spool control and spool positioning devices
• on-off electric control with manual override and emergency unloading valve.

Technical details for the 1 to 8 section Salami VD10A series are as follows:

• 280bar / 4050 psi operating pressure
• 140 litres/minute maximum flow per section
• P/S/T circuit
• 120 litres/minute nominal flow
• 280 bar / 4050 psi maximum operating pressure – P
• 315 bar / 4600 psi maximum operating pressure – A/B
• 25 bar / 360psi, maximum operating pressure – T

Contact us for further technical details and configuration options.