Description
Continually increasing power densities in modern hydraulic systems require high demands on filtration and cooling to significantly increase the lifetime of the oil and of all hydraulic components.
Argos Hytos continues to promise innovative solutions. Therefore, in addition to the already established versions for tank mounting, they now offer compact and installation-friendly units, which can be easily integrated into the line and are therefore suitable for retrofitting. Equally, in order to meet the needs of the market, Argo Hytos has extended the performance limits upwards. The maintenance-friendly Filter Cooling Units FNK 051/101/151 can be used with up to 137 kW cooling capacity at a nominal flow rate of 175 l/min in the return-flow or off-line filtration. By combination of a fine filter and an oil/water heat exchanger in one single unit, the required space is considerably reduced compared to conventional solutions, so that within the smallest space highest demands on the system can be fulfilled.
Argo Hytos filter cooling units are designed to be integrated into a wide variety of applications.
The wider model line up follows:
- The FNK 050, with an operating pressure up to 10 bar and a nominal flow rate up to 75 l/min. It has a cooling capacity up to 13 kW.
- The FNK 100, with an operating pressure up to 10 bar and a nominal flow rate up to 125 l/min. It has a cooling capacity up to 45 kW.
Contact us for help with configurations, or more information concerning Argo Hytos filter cooling units.
